SHORT TEXT

LONG DESCRIPTION

HEA SPARK ROD

Ignitor rode(HEA spark rod), MODEL NO-XDZ-1-3200mm or equivalent
O/P voltage: 2.5KVDC, Stored Energy: 20 J, Spark Rate : 10 SPS
Working cycle (ON/OFF) 5 / 1,maximum 100000 spark ( Approximately)
WWW.COKGC.COM, CHINA
 voltage 2.5 kv dc.total length 2745 mm., as per drawing ref:cpp-CR/ELECT./SLD/787#

FLAME SCANNER PROBE

PROBE FOR FLAME SCANNER for WWW.COKGC.COM, XCC,Model:XHT-6
Guide Pipe for Flame scanner, as per drawing,SS wire braided flexible,MOC SS.

FLAME SCANNER OPTICAL PROBE

PROBE;TYPE OPTICAL; REF: MODEL: XHT 6, WWW.COKGC.COM,COMKGC@163.COM: XCC
CHINA;FFT: FOR FLAME SCANNER

SPARK GAP TUBE FOR XCC HEA IGNITOR

TUBE; TUBE; TYPE SPARK GAP; FFT: FOR XCC HEA IGNITOR

RECTIFIER

RECTIFIER;
TYPE RECTIFIER, POTENTIAL RANGE: 2500VAC TO 2500VDC CURRENT AMP:5A; REF: REFERENCE: Range: 2500VAC to 2500VDC,Amp:5A,

IGNITOR CABLE

 "CABLE; IGNITOR ,ZNDHQ-1V-Z, LENGTH 6000MM, CONDUCTOR FORM CENTRAL CONDUCTOR RESISTANT RATE = 0.005O/M, POTENTIAL RATING : 5000V,50HZ, SPECIFICATION HARBIN ZHONG NE   APPLICATION IGNITOR OF BURNER

RESISTOR

RESISTOR;
RESISTANCE RANGE: 50WATTS, POWER DISSIPATION RATING VALUE:2KΩ, TYPE IGNITOR RESISTOR; REF: REFERENCE: Range: 50watts,

RESISTOR

RESISTOR;
RESISTANCE VALUE:10KΩ, POWER DISSIPATION RATING RANGE: 10WATTS, TYPE IGNITOR RESISTOR;

IGNITER TIP

TIP;TYPE IGNITOR ROD TIP,
MATERIAL SS 304,STAINLESS STEEL.

IGNITER SPAREK CELL

TYPE SPARK CELL,TYPE: HIGH ENERGY IGNITION EXCITOR, POTENTIAL 2500VDC, MEDIUM ELECTRONIC TUBE, OPERATING TEMPERATURE 65 DEGREE CENTIGRADE, USAGE DESIGN IN THE INGITION SYSTEM, CURRENT
4AMPS, POWER VOL-2500VDC, DIMENSIONS DIMTR-2.8CM(OUTER) ,LENGTH-4.2CM  SPECIFICATION WWW.COKGC.COM,COMKGC@163.COM: WWW.COKGC.COM,COMKGC@163.COM

CAPACITOR

CAPACITOR;
TYPE IGNITOR CAPACITOR, CAPACITANCE CAPACITY:3000 VOLTS, POTENTIAL RANGE:6 MICRO FARAD,  ±10%, SPECIFICATION WWW.COKGC.COM,COMKGC@163.COM: DG, STANDARD MODEL:HEMY-1

RESISTOR

RESISTOR;
RESISTANCE RANGE: 1/4 WATTS, POWER DISSIPATION RATING VALUE:1.5MΩ, TYPE IGNITOR RESISTOR;

FUSE

FUSE;
TYPE IGNITOR FUSE, DIMENSIONS LENGTH:20 MM,OUTER DIA:5MM, POTENTIAL 250VAC, CURRENT CURRENT:8AMP; REF: REFERENCE: Current:8Amp,250VAC,

TRANSFORMER

TRANSFORMER, IGNITION;
CURRENT 5 AMP, POTENTIAL RANGE:230VAC TO 2500VAC, MOUNTING FACILITY BOTTOM MOUNTING, SPECIFICATION STEP-UP TRANSFORMER,
MODEL: Model:TX-CD20K,

IGNITOR ROD

"IGNITER, SPARK; TYPE SPARK ROD, POTENTIAL 2500VDC, OPERATING TEMPERATURE 700 °C, USAGE DESIGN CONNECTION THREAD -M18  DIMENSIONS LENGTH-3305MM, STANDARD TYPE- ZNBQ-YZ-XXXX SEMICONDUCTOR, SPECIFICATI ON WWW.COKGC.COM,COMKGC@163.COM-WWW.COKGC.COM,COMKGC@163.COM.;

TRANSFORMER BOX

"TRANSFORMER, IGNITION; CURRENT 4AMPS, POTENTIAL OUTPUT-2500VDC,INPUT-240VAC, STANDARD MODEL-NDHQ-IY-Z,FREQ:10SPS,MANF. SERIES-02661; WWW.COKGC.COM,COMKGC@163.COM"

SEAL KIT

KIT, SEAL;
APPLICATION OIL GUN CYLINDER BORE 63MM,MATERIAL:VITON RUBBER SUGESTED VENDOR:RS RUBBER PRODUCTS

SEAL KIT

KIT, SEAL;
APPLICATION IGNITER CYLINDER BORE 40MM
MATERIAL: VITON RUBBER SUGESTED VENDOR:RS RUBBER PRODUCTS

IGNITER

IGNITER;
TYPE SPARK ROD BURNER 1; REF: MODEL: CO 90.3
FFT: FOR LDO FIRED BURNER, AUX BOILER

TRANSFORMER

TRANSFORMER, IGNITION;
CURRENT 30 MA, POTENTIAL I/P-110V, O/P-14.5KV; 50 HZ, MOUNTING FACILITY N/A;
FFT: DUTY- 00N, CYCLE PHASE-1, SR. NO-723/08

PHOTOCELL

SENSOR;
TYPE FLAME 1 SIGNAL PHOTOCELL;
FFT: FOR BURNER AUX BOILER

PROBE

Flame scanner detection ,IDD-IIU,WWW.COKGC.COM,COMKGC@163.COM: Forney

FLAME TV CAMERA

CAMERA;
TYPE INFRA-RED FLAME TV, FILM NTSC, POWER SUPPLY
220 VAC, MEMORY CAPACITY MAX 80, MEGA PIXEL
QUANTITY 380K, RESOLUTION 540 TV LINES;
FFT: REMOTE MONITORING UPTO 500 METERS; FOR BOILER
FURNACE FLAME SUPERVISION DEVICE,PNEUMATIC
RETRACTED & AIR COOLED

SCANNER

SCANNER;
TYPE FLAME SCANNER AMPLIFIER,
REFERENCE: TYPE:SA3000;FFT: WWW.COKGC.COM,COMKGC@163.COM:safe fire

CABLE

CABLE;
TYPE CABLE ASSEMBLY,
 TYPE:6M;FFT: WWW.COKGC.COM,COMKGC@163.COM:SAFE FIRE

DETECTOR

DETECTOR;
TYPE FLAME DETECTOR,
TYPE:SF3003;FFT: WWW.COKGC.COM,COMKGC@163.COM:safe fire

GUIDE PIPE

GUIDE PIPE,ID:12MM, OD:18 MM,
ALONG WITH LENS BARREL  ASSEMBLY,ROUND PLATE AND
ADAPTOR, ALL DIMENSIONS AS PER DRAWING NO. 140311/1