EATON_KGC

Contact

Address：No.31 Jinzhou Road, Nanning, Guangxi, China
Tel：+86-13877625497
Name：Mr.Chintu
Fax：
Website：https://www.cokgc.com/
E-mail：COMKGC@163.COM

Current：Home > E F G H

E F G H

EATON

2017-03-30 12:29:10

DIL EM-01-G(12VDC)

DIL EM-01-G(24VDC)

DIL EM-01-G(48VDC)

DIL EM-01-G(110VDC)

DIL EM-01-G(220VDC)

DIL EM-01-G-C(24VDC)

DILEM-01-G(12VDC)

DILEM-01-G(24VDC)

DILEM-01-G(48VDC)

DILEM-01-G(110VDC)

DILEM-01-G(220VDC)

DILEM-01-G-C(24VDC)

MOELLER DILEM-01-G

is now

EATON XTMC9A01

SAME EXACT PART - ONLY PART # CHANGE - CLICK THE XTCE NUMBER TO VIEW THE NEW PAGE

Part #

Hp @ 230 HP @ 460 Amps Normally Open Pwr Normally Open Aux Normally Closed Aux

DILEM-01-G 3 5 9 3 0 1

DILEM-01-G Ordering Information

Part Name Article

Number Rated

Operational

Current

AC-3 Max. rating for three

phase motors, 50 60 Hz

UL / CSA Hp Aux Contacts

230 V 460 V NO NC

DILEM-01-G

(110VDC) 10136 9A 3 5 0 1

DILEM-01-G

(12VDC) 7942 9A 3 5 0 1

DILEM-01-G

(220VDC) 10168 9A 3 5 0 1

DILEM-01-G

(24VDC) 10343 9A 3 5 0 1

DILEM-01-G

(48VDC) 10496 9A 3 5 0 1

DILEM-01-G

(60VDC) 10040 9A 3 5 0 1

DILEM-01-G-C

(110VDC) 231694 9A 3 5 0 1

DILEM-01-G-C

(12VDC) 231691 9A 3 5 0 1

DILEM-01-G-C

(220VDC) 231695 9A 3 5 0 1

DILEM-01-G-C

(24VDC) 230167 9A 3 5 0 1

DILEM-01-G-C

(48VDC) 231692 9A 3 5 0 1

DILEM-01-G-C

(60VDC) 231693 9A 3 5 0 1

Klockner Moeller Electric DILEM-01-G

Includes:

Qty 1 - DILEM-01-G

(AC Operated Contactor) as indicated by the red arrow and green coloring. Overload Relays and Suppressors sold separately.

Miniature contactors with positively driven contacts. Not in the case of early-make or late-break contacts. The DC operated contactors are supplied as standard with a diode/resistor combination

surge suppressor. Coil power consumption: 2,6 W Contactor contacts to EN 50 012 Auxiliary contact module contact: ...DIL EM to EN 50 012 ...DIL E to EN 50 005 Contacts to EN 50 012 should be given preference.

Miniature Contactors

Miniature contactors with positively driven contacts, except in the case of early-make or late-break contacts. The DC operated contactors (-G) are supplied as standard with a diode/resistor combination surge suppressor. Coil power consumption: 2,6 W Contactor contacts to EN 50 012 Auxiliary contact module contact: ...DIL EM to EN 50 012 ...DIL E to EN 50 005 Contacts to EN 50 012 should be given preference.

Basic Models

Klockner Moeller Electric DILEM

Contactor indicated by green color and red arrow.

Part# Hp @ 230 HP @ 460 Amps Normally Open Power Normally Open Aux Normally Closed Aux

DILEM-10 3 5 15 3 1 0

DILEM-10-G 3 5 15 3 1 0

DILEM-01 3 5 15 3 0 1

DILEM-01-G 3 5 15 3 0 1

DILEM-4 3 5 15 4 0 0

DILEM

Auxiliary Contacts

Klockner Moeller Electric DILEM

FOR USE ON "DILEM" Amps Normally Open Normally Closed

02DILEM FOR USE ON "DILEM" 10 0 2

11DILEM 10 1 1

22DILEM 10 2 2

DILER

Auxiliary Contacts

Klockner Moeller Electric DILER

FOR USE ON "DILER" Amps Normally

Open Normally Closed

02DILE FOR USE ON "DILER" 10 0 2

11DILE 10 1 1

20DILE 10 2 0

11DDILE 10 1 1

04DILE 10 0 4

13DILE 10 1 3

22DILE 10 2 2

31DILE 10 3 1

40DILE 10 4 0

22DDILE 10 2 2

DILEM-4-G 3 5 15 4 0 0

DILM Accessories

PART # CONTACTOR FOR USE ON DESCRIPTION FUNCTION

RCBDIL48 DIL00AM, DIL00M, DIL0AM, DIL0M, DIL1AM, DIL1M, DIL2AM, DIL2M RC Suppressors For AC operated contactors, 50 – 60 Hz.

Drop-out delay should be taken into

consideration.

RCBDIL250

RCBDIL415

RCSDIL48 DIL3M80, DIL4M115 RC Suppressors For AC operated contactors, 50 - 60 Hz. Drop out delay should be taken into consideration.

RCSDIL250

RCSDIL415

VGBDIL24 DIL00AM, DIL00M, DIL1AM, DIL1M, DIL2AM, DIL2M, DIL3M80, DIL4M115 Varistor Suppressors For AC operated contactors, 50 – 60 Hz,

(DIL00M to DIL4M115) and DC operated

contactors (DIL00M-G to DIL2AM-G).

DC operated contactors DIL3M80 to

DIL4M115 have an integrated varistor

suppressor as standard.

VGBDIL48

VGBDIL250

VGBDIL415

VGCDIL24 DIL00AM, DIL00M, DIL0AM, DIL0M, DIL1AM, DIL1M, DIL2AM, DIL2M Suppressors For DC operated and AC operated contactors

DIL00M to DIL2AM

VGCDIL48

VGCDIL250

VGCDIL415

FDBDIL DIL00M, DIL00AM, DIL0M, DIL0AM, DIL1AM, DIL1M, DIL2AM, DIL2M Free-wheel diode suppressor For DC operated contactors. Drop-out delay should be taken into consideration.

S1DIL00M DIL00M & DIL00AM STAR BRIDGE

SOLID JUMPER THAT CONNECTS ALL 3 POWER POLES TOGETHER. HAS NO INCOMING WIRE TERMINAL CONNECTIONS.

S1DIL0M DIL0M & DIL0AM

S1DIL1M DIL1M & DIL1AM

S1DIL2M DIL2M & DIL2AM

S1DIL3M DIL3M80

S1DIL4M DIL4M115

DILM400-XS1 DILM185-DILM400

DILM500-XS1 DILM500

P1DIL00M DIL00M & DIL00AM PARALLELING BRIDGE

SOLID JUMPER THAT CONNECTS ALL 3 POWER POLES TOGETHER AND HAS A SINGLE INCOMING TERMINAL CONNECTION.

P1DIL0M DIL0M & DIL0AM

P1DIL1M DIL1M & DIL1AM

P1DIL2M DIL2M & DIL2AM

P1DIL3M DIL3M80

P1DIL4M DIL4M115

DILM185-XP1 DILM185

MVS-WB-00M DIL00(A)M REVERSING JUMPER KIT

(1) MVDILM-Mechanical Interlock.

Must be purchased separately

Consisting of one 3 pole paralleling link (top) and reversing link with A2 coil bridge (bottom). To form a reversing contactor. An overload module cannot be directly connected to the contactor and if needed must be mounted remotely.

MVS-WB5MV DIL00(A)M+MVDILM (1)

MVS-WB-0M DIL0(A)M

MVS-WB-11MV DIL0(A)M+MVDILM (1)

DIUL0(A)M/MV

MVS-WB-1M DIL1(A)M

DIUL1(A)M

BT480 All top mounting auxiliary contacts Paralleling Links Not insulated. Standard Quantity: 100

AKDIL3M DIL3M80 Adapter Set

consisting of six adapters for cable lug connection For connecting cables with crimped lugs. Set includes 2 terminal covers.

AKDIL4M DIL4M115

MVDILM DIL00(A)M, DIL0(A)M, DIL1(A)M, DIL2(A)M MECHANICAL INTERLOCK KIT For providing mechanical interlock between 2 contactors. No side mount auxiliary contacts may be used except on the opposite sides of the MV module.

DILM500-XMV DIL3M80, DIL4M115, DILM185, DILM225,DILM250, DILM300, DILM400,DILM500

DILM820-XMV DILM580, DILM650, DILM758, DILM820

DILM225-XKU-S DILM185, DILM225 Cable Terminal Block with control circuit terminal For cable connection. Single or double cables may be

connected.

DILM400-XKU-S DILM250, DILM300, DILM400

DILM650-XKB-S DILM500, DILM580, DILM650 Flat Strip Conductor Terminal Kit For bus and flexibus connection.

DILM820-XKB-S DILM750, DILM820

ZKDIL0M DIL0AM, DIL0M Control Circuit Terminals Pressure wire connectors mounted directly to the main

terminals for control circuit tap-off.

15A, 600V max., AWG 18 - 14

ZKDIL1M DIL1AM, DIL1M

DIL2AM, DIL2M

ZKDILM DIL3M80, DIL4M115

HKDILM DIL1AM, DIL1M

DIL2AM, DIL2M Main Terminal For connecting large cross-sections,

For connection of:

up to 50 mm2 stranded

or 35 mm2 flexible with ferrule

DILM400-XHB DILM185, DILM22, DILM250, DILM300, DILM400 Terminal Cover Protection against shock hazards and accidental contact

DILM500-XHB DILM500

DILM650-XHB DILM580, DILM650

DILM820-XHB DILM750, DILM820

V0DIL DIL00M, DIL00AM, DIL0AM, DIL0M, DIL1AM, DIL1M, DIL2AM, DIL2M Coupling

Connector 0 mm distance between contactors

V5/15DIL 5mm between contactors, for contactors with DC coil 15mm between contactors, for mechanical interlock between contactors.

V10/A5DIL 10mm between contactors, for mounting one side mounting auxiliary contact between two contactors 5mm between contactors for contactors with DC coil without permanent connection.

CS-TE ETS4-VS3 For screw mounting of ETS4-VS3

TPE11DIL DIL00M-DIL2AM Top Mount ON Delay Timer Snaps on the top of the contactor and provided (1) Normally Open and (1) Normally Closed Timed Contact. Adjustment ranges either (0.2-30) or (20-180) seconds.

TPD11DIL DIL00M-DIL2AM Top Mount OFF Delay Timer

V-GDIL

(24vdc) DIL00M Top Mount Latching Module With addition of this module a standard DIL00M becomes a Latching relay. Pulse the DIL00M coil to Latch and pulse the module coil to UNLATCH.

V-DIL

(120VAC) DIL00M

NDIL0M DIL0M 4th Power Pole. Adding this module to a standard 3 pole contactor makes it a 4 Pole Power contactor Continuous Rating Open 35 Amps.

Continuous Rating Closed 30 Amps.

NDIL1M DIL1M Continuous Rating Open 55 Amps.

Continuous Rating Closed 44 Amps.

NDIL2M DIL2M Continuous Rating Open 75 Amps.

Continuous Rating Closed 60 Amps.

BT483 DILEM

DIL00M to DILM820 Connection tabs for fast-on connectors For auxiliary contact and coil connections. Use connectors with insulated sleeves. Standard quantity: 100

BT2571 DIL3M80 to DILM820

PL-DILT TPE11DIL

TPD11DIL Sealable Shrouds Cover is fastened via a screw. Sealable to prevent access.

XGKA-U Universal Mounting Adapter

Mounting:

Self Adhesive

with M3 screw or

cable tie Standard Quantity: 250

VS1DIL DIL00M-DIL2AM Contactor Mounted incoming voltage interface module with integral suppressor circuit. For energizing of the contactor from low level 24 vdc inputs. The VS1 and VS2 plug directly onto the DILM coil terminals

VS2DIL Contactor Mounted incoming voltage interface module with out integral suppressor circuit.

ETS4-VS3 Any Contactor

with less than 2 amp coil

SEPARATE

DIN RAIL MOUNT

For energizing of the contactor from low level 24 vdc inputs.

MOELLER ZE Thermal Overload Relays

is now

EATON XTOM Thermal Overload Relays

for direct mounting to DILEM and DILEEM Contactors

SAME EXACT PART - ONLY PART # CHANGE - CLICK THE XTCE NUMBER TO VIEW THE NEW PAGE

Circuit Diagram Adjustable Setting Range Normally Open Normally Closed Short Circuit Protection

by fuses max. 600 V AC by Circuit Breaker max. 600 V AC

ZE-0.16

ZE Overload Relay Circuit Diagram 0.1 - 0.16 1 1 1 15

ZE-0.24 0.16 - 0.24 1 1 1 15

ZE-0.40 0.24 - 0.4 1 1 1 15

ZE-0.60 0.4 - 0.6 1 1 1 15

ZE-1.0 0.6 - 1.0 1 1 3 15

ZE-1.6 1.0 - 1.6 1 1 6 15

ZE-2.4 1.6 - 2.4 1 1 6 15

ZE-4 2.4 - 4 1 1 15 15

ZE-6 4 - 6 1 1 20 15

ZE-9 6 - 9 1 1 35 15

ZE-12 9 - 12 1 1 45 15

WWW.COKGC.COM

Enquiry Mailto:

COMKGC@163.COM

→We quotation

→You Released PO

→We signed

→You payment

→We delivery

Return to home page↑︿↑︿↑︿

previous posts:Fairchild
Next Article:FSG