Current:Home > + Anode plant machin
+ Anode plant machin
Flue Wall straightening and Cleaning Machine which earlier
2014-08-07 22:32:36
STRAIGHTENING M/C,FLUE WALL,750MM PIT
STRAIGHTENING MACHINE,FLUE WALL FOR 750MM PIT
 
 
 
 

Enquiry this, Mailto:COMKGC@163.COM

 
 
 

 

 

WWW.COKGC.COM

 
 

We have supplied this same type to anode plant of China, Please read carefully the instructions before use
  
 
 
THE TECHNICAL AND MANUAL FOR
 
 
STRAIGHTENING M/C,FLUE WALL,750MM PIT
STRAIGHTENING MACHINE,FLUE WALL FOR 750MM PIT
 
 
 
Orders to record
 
Product overview.....................................................
Technical parameter.................................................
The furnace wall of the straightening machine use....................................
Security protection performance..............................................
General failure of elimination............................................
Maintenance.....................................................
Attached: the furnace wall straightening machine hydraulic principle diagram...............
Furnace wall straightening machine circuit diagram.......................................
Hoisting diagram..........................................
Calibration furnace wall diagram....................................
 
 
 
 
KGCECL32 0 wall straightening machine is composed of hydraulic system and electric control system, its reasonable structure, simple operation, easy to maintain.Hydraulic and electric control system installed in the supporting plate, with the lifting machine, electric control part with fire electricity at threading, on the surface of the furnace operator control button on the surface of the furnace, the temperature control and limit by the system automatically.
Furnace wall straightening machine installation dimensions as shown in figure:
 

 

 

WWW.COKGC.COM

 

 

 

 
General failure of elimination

 
General failure
 
Elimination method
 
oil leak
 
 

Replace the seal.
 
Activities forward wall plate is not parallel
 
Adjust the four cylinder of the one-way throttle valve, make the four cylinder speed.
 
Hydraulic system pressure to reach the rated pressure
 
 

Adjust the pump pressure.
 
 
 
CLEANING MACHINE,FLUE WALL,FOR 750MM PIT
CLEANING MACHINE,MOTORIZED,FLUE WALL,FOR 750MM PIT
 

 

 

WWW.COKGC.COM

CLEANING MACHINE,FLUE WALL,FOR 750MM.
 
A, parameters and structure description:
Furnace wall cleaning machine by the bracket body, frame, steel brush, etc, mechanical automatic type
 
(stretch) to adjust the tension.
Dimension: 4200 * 724 * 1070 mm, Single steel wire brush area: 0.17 m2
Second, the furnace wall and the use of cleaning machine adjustment:
Furnace wall cleaning machine cleaning furnace wall is fire wall inside the furnace wall of two side simultaneously (as shown in figure 1), single is composed of eight independent steel brush surface meet the not roughness of wall, and the size of the tension and can be adjusted.

 

 Again after installation of steel wire brush steel plate welding, weld height is 5 mm.

  

 
 Email of KGC
 
comkgc@163.com
 
WeChat NO
 
CH-0086-13877625497
 
Contact ,mobile
 
Mr. Chintu, 008613877625497
 
Website
 
 

 

Purchase Process:

Mailto:

COMKGC@163.COM

We quotation

You side Released PO to us

We signed PO

You side payment

We delivery goods to your side.

Return to home page↑︿

Service Hotline
+8613877625497
E-mail
COMKGC@163.COM
close